Stanley TP08 Hydraulic Submersible Pump
Stanley TP08 Hydraulic Pump
4" Hydraulic Submersible Wastewater/Trash Pump
The Stanley TP08 Trash Pump is a lightweight, yet heavy duty pump capable of pumping high volumes of water, sand slurries, gravel, sludge and solids up 75 mm in diameter. The TP08 is submersible, self-priming and can run dry without damage to the motor, bearings or impeller.
The TP08 will pump up to 200 m³/h and a maximum head of up to 14m. The free-flow impeller and 4" inlet and outlet combine to make the TP08 one of the most efficient pumps in the business
Weighing under 27 kg, and with its convenient handle, the TP08 can easily be lifted by one operator. The TP08 and the Stanley HS10DH Compact Power Unit make a powerful, portable team for high volume de-watering and trash pump applications.
The heavy-duty construction of the TP08 features a fabricated, all steel volute and abrasion resistant cast iron impeller. The volute uses replaceable UHMW polyethylene wear plates to reduce wear and extend pump life. The heavy-duty Stanley HYREVZ™ hydraulic motor is self-lubricating.
- Maximum Flow: 200 m³/hr
- Maximum Head: 14 m
- Safe Hydraulic Drive can be used where electric power is hazardous or impractical
- Operates with our HS10DH Hydraulic Power Unit
Stanley TP08 Hydraulic Pump Applications
The Stanley TP08 is suitable for a range of applications:
- Sewer bypass into force mains
- General transfer of solids laden fluids
- Where electric power is hazardous or impractical
Stanley TP08 Hydraulic Pump Specification
|Flow Range||26 - 34 l/min|
|Ports||#10 SAE (Press.) #12 SAE (Ret)|
|Connection||1/2 in. Male Pipe (Press.) 3/4 in. Male Pipe (Ret)|
|Discharge Connection||4 in. Camlock|
Stanley TP08 Hydraulic Pump Datasheet
Download the datasheet for the Stanley TP08 Hydraulic Pump