Home > Pump Hire > High Head Pumps > Sterling SPP Autoprime QHH80

SPP Autoprime QHH80 High Head Pump

 

SPP Autoprime QHH80 High Head Pump for Hire

Hire this Pump

Hire an SPP Autoprime HH100 High Head Pump.

Send an enquiry for hire rates and to book for your next job!

 

SPP Autoprime QHH80 High Head Pump

80mm High Head Automatic Priming Pump

Sterling SPP Autoprime QHH80 High Head Pump

The SPP AUTOPRIME QHH80 pump is designed for high head and modest flow applications including jetting, washing and in mines and quarries where a high lift is required. Solids handling is limited by the use of a high performance design for the impeller.

Features

  • Maximum Head: 89 m
  • Maximum Flow: 120 m³⁄hr
  • Bunded unit on two wheel road trailer with fixed height towing eye or 50mm ball hitch
  • Alternative trailer for the QHH80 with variable height draw bar is available (adds 35kg to weight)
  • 12 volt battery starting by key switch
  • Pump will pass solids up to 9.2mm diameter
  • Reliable double mechanical seals which allow dry running
  • Pump can be left running when liquid is exhausted and will prime automatically when liquid is present
  • Rugged construction requires minimal operator maintenance
  • 65 cfm Vacuum Pump with coalescer and air filtered before exhaust to atmosphere

SPP Autoprime QHH80 High Head Pump Applications

The SPP Autoprime QHH80 High Head Pump is suitable for a range of applications:

  • Jetting
  • Washing
  • Mines
  • Quarries

SPP Autoprime QHH80 High Head Pump Specification

Pump  
Flow Rate 120 m³/h max.
Discharge Head 89 m max.
Working Pressure 10 bar max.
Hose Size 80 mm Diameter
Max. Solids Size 9.2 mm
Speed Rating 1500 - 2650 rpm
Pump Casing Cast Iron
Impeller Stainless Steel
Pump Shaft Stainless Steel
Wear Plates SG Iron
Suction Sump Cast Iron
Shaft Seal Silicon Carbide
Elastomer Viton
Chassis Options Skid or Pod Mounted
Engine  
Model Isuzu 4LE2 water cooled
Power 33.3 kW @ 3000 rpm
Starting 12 volt battery by key switch
Fuel Tank Capacity 220 litres
Full Load Consumption 8.9 litres/h average
Full Load Running Time 26 hours
Dimensions  
Overall Dimensions L4272 x W1600 x H1778 mm
Weight 1313 kg wet

pdf logo

Datasheet

Download the datasheet for the SPP Autoprime QHH80 High Head Pump

SPP Autoprime QHH80 High Head Pump