|
|
|
Catalogue Telephone 01246 201111 for sales enquires or email sales@marispumps.com The 4SKm 100E - a high head pump with a 304 stainless steel The 50PU2 series of sewage pumps, have 304 stainless steel motor frames The 50U2 series of sewage pumps, are of a cast iron construction for The 80U2 series vortex impeller sewage pumps are of cast iron construction The Acuatec series and the Acuasub are high head pumps for use in domestic, industrial and, in particular, agricultural applications. The Pendant & Agma float switches for fitting to single phase Tsurumi and JS submersible pumps. The Amazon and Congo pumps are low voltage, D.C., plastic submersibles for The Acuabig series are high head pumps, with excellent fl ow rates, for large The B series are single-channel impeller sewage pumps of a cast iron construction. The Baby pumps are low voltage, D.C., plastic submersibles for battery operation only. The Bailer is a lift and force hand pump for water and diesel drainage and transfer. The Bipump is a rotary vane self-priming pump that can be operated on either 12 or The BP series are diesel pumping stations designed for private distribution of fuel. Presscontrol and Mascontrol controllers are electronic pressure switches with integral dry running protection and non-return valve. The BX series comply with the ATEX directive 94/9/EC and hence have The BZ sewage pumps are of cast iron construction and are fi tted with The C series, sewage cutter pumps are of a cast iron construction with a single channel, hardened iron impeller, which rotates against a serrated suction cover to cut solids before pumping. The KS1101/22 and CAM88/25 automatic booster sets are single pump, self-priming units with plastic venturis and single plastic impellers. The CAM automatic boosters are single pump, self-priming units with 304 stainless steel bodies plastic venturis and impellers. The QA is a basic control panel with a thermo-plastic IP50 enclosure for use with fl oat switches or probes to control a single phase (D.O.L. 230V) or a three phase (D.O.L.400V) pump. The CP range are non-self priming, horizontal, single-stage, centrifugal pumps with cast iron pump bodies and brass impellers. The CP25 pumps are non-self priming, horizontal, single-stage, centrifugal pumps with a cast iron pump body and brass impeller. The CR series are multi-stage, non-self priming pumps with 304 stainless steel bodies, and plastic venturis and impellers. The Cube 56 is a diesel pumping station of commercial design for private distribution of diesel fuel only. The CX series, sewage cutter pumps, comply with the ATEX directive 94/9/EC and have explosion proof motors. The DD series are push-pull, lever operated, double diaphragm, hand-pumps for water, soft solids (in suspension), oil drainage and transfer. The Diesel 2000 is a low voltage, D.C., rotary-vane, self-priming
pump with a bypass valve and cast iron pump body and is for The DIG11 is a light and compact contractor pump, capable of pumping exceptionally The SCK3G and Divertron are portable, high head, automatic pumps constructed in a composite of high quality engineering plastics. They are both designed for clean water applications only. The DP series are pumps for mounting directly on to 205 litre (45 gallon) drums, via the 2”FBSP fi tting, for diesel transfer only. The E120 is a self-priming rotary vane pump with a cast iron pump body for transferring large quantities of diesel only. The e-Boost is a self-priming, multi-stage, pressure pump with integral electronics for the ultimate in automatic pressure boosting in domestic and industrial applications. The Ecosub is constructed of composite industrial plastics with 316 stainless steel fi xings and motor frame. H07RN-rubber cable is supplied by the metre in nominal section sizes of 1.5mm² to 10.0mm²
. ENM pumps are self-priming and have bronze bodies and single impellers. They have 316 stainless steel shafts, which are fi tted with NBR lip seals. The Eurojet pump can be used in domestic, industrial and EUROJET agricultural applications. |
|---|---|
|
